WELLFLOAT Delta Isolation Base – HiFi Insulator
WELLFLOAT Delta Extreme
Delta Extreme
(with a hole for spike)
Delta Extreme
(no hole)
TECHNICAL FEATURES
- Introducing a special machined aluminum version of the much-talked-about WELLDELTA!
- Universal insulator ideal as a spike holder (*only for versions with spike holes).
- The top model of the WELLFLOAT and WELLDELTA series, which has a reputation for audiophiles and uses a suspension structure to suppress sound distortion (almost the same size).
- Machined aluminum for the top board eliminates unnecessary resonance and achieves a purer sound quality than WELLDELTA.
- By incorporating three WELLFLOAT mechanisms per insulator, each insulator can withstand a load of 250 kg (common mechanism with high-end racks)
- Relatively small size allows for more flexible use than traditional WELLFLOAT boards.
- The modern appearance makes it a perfect fit for speakers with metal enclosures, etc. Flexibility for use with spiked or non-spike legs.
< Specifications>
Design : 3 x Small WELLFLOAT Mechanism inside
Material: Stainless Steel, Aluminium
Dimensions : Width 155mm, Height 36mm
Weight : 1.2kg
Supported Load : 250kg per piece with static weight
(means 1,000kg in total with 4 Delta pieces. )
WELLFLOAT Delta
Standard
(with 5mm height ring)
20mm height option
(Solid Aluminium)
28mm height option
(Solid Aluminium)
TECHNICAL FEATURES
- Renowned “WELLFLOAT” pendulum floating technology is designed to minimize distortion by controlling unnecessary vibrations.
- Engineering ideas developed into a new concept, based upon the WELLFLOAT-Piano and High-End rack models.
- Multiple intended uses including under spikes or as supports for the feet of HiFi devices such as speakers and amplifiers.
- 3 individual, internal mechanisms allow an increased maximum weight – 250kg each
- Compact, simpler and more cost effective than previous models.
Standard Configuration
< Specifications>
Design : 3 x Small WELLFLOAT Mechanism inside
Material: Stainless Steel, Aluminium, Resin
Dimensions : Width 150mm, Height 36mm
Weight : 623g
Supported Load : 250kg per piece with static weight
(means 1,000kg in total with 4 Delta pieces. )
- Devices with feet longer than 30mm with or without spikes
- If you use Spikes, the diameter of the spikes should be more than 5mm and the length should be less than 5mm
Note :
It is strongly recommended to consult to your local shop, distributor or us with detailed diagram before purchasing to check if there’s potential conflicts
with 20mm option
< Specifications>
Design : 3 x Small WELLFLOAT Mechanism inside
Material: Stainless Steel, Aluminium, Resin
Dimensions : Width 150mm, Height 36mm
Weight : 768g
Supported Load : 250kg per piece with static weight (means 1,000kg in total with 4 Delta pieces. )
- Devices with feet longer than 10mm with or without spikes
- For Spikes, the diameter should be more than 5mm
Note :
It is strongly recommended to consult to your local shop, distributor or us with detailed diagram before purchasing to check if there’s potential conflicts
with 28mm option
< Specifications>
Design : 3 x Small WELLFLOAT Mechanism inside
Material: Stainless Steel, Aluminium, Resin
Dimensions : Width 150mm, Height 36mm
Weight : 829g
Supported Load : 250kg per piece with static weight
(means 1,000kg in total with 4 Delta pieces. )
- Bottom of your Device should have “flat” surface or with feet with flat bottom
- For your safety, Spike is not allowed to be directly installed on this product
Note :
It is strongly recommended to consult to your local shop, distributor or us with detailed diagram before purchasing to check if there’s potential conflicts
